capacitive current calculator
Compute capacitor current using ๐ผ=2๐๐๐ถ๐ or I= v/๐C where Xc=1/2rfc.Supports RMS/peak, 50/60 Hz, and any capacitance.
reactive current calculator
Capacitive current increases as a function of frequency and capacitance and and is 90 degrees leading in phase with voltage. Apply RMS formulae to sine waves or i(t)=C(dv/dt) to transients. Current through a capacitor in AC is stipulated by frequency, capacitance, and applied voltage.
Formula & Table Summary:
\( I_{\text{rms}} = 2\pi f C V_{\text{rms}} \)
\( X_C = \frac{1}{2\pi f C}, \ I_{\text{rms}} = \frac{V_{\text{rms}}}{X_C} \)
\( I_{\text{peak}} = \omega C V_{\text{peak}}, \ \omega = 2\pi f \)
60hz capacitor current
Compute current in capacitor by using voltage, frequency and capacitance. In sinusoidal AC, I = 2pi f C V, or equivalently, I = V/XC, with XC = 1/( 2pi f C).This kind of accurate calculation helps avoid over-heating, nuisance open-circuit, and component breakdown and ensures adherence to current ratings of switches, fuses and PCB traces.
capacitive reactance current
| Vrms (V) | f (Hz) | C (ยตF) | Calculation | Irms (A) |
|---|---|---|---|---|
| 230 | 50 | 50 | 2ฯยท50ยท50e-6ยท230 | 3.61 |
| 120 | 60 | 20 | 2ฯยท60ยท20e-6ยท120 | 0.905 |
| 240 | 60 | 100 | 2ฯยท60ยท100e-6ยท240 | 9.05 |
| 110 | 50 | 10 | 2ฯยท50ยท10e-6ยท110 | 0.346 |
| 400 | 50 | 200 | 2ฯยท50ยท200e-6ยท400 | 25.13 |
Frequently Asked Questions - capacitive current calculator:
How do I calculate capacitor current?
Use I=2ฯfCVrms for sinusoidal AC, or I=Vrms/Xc with Xc=1/(2ฯfC).
Does current lead or lag in a capacitor?
Current leads voltage by 90ยฐ in a purely capacitive circuit.
What units should I use?
C in farads, f in hertz, V in volts, current in amperes.
How do I handle peak values?
Use Ipeak=ฯCVpeak with ฯ=2ฯf.
What if the waveform isnโt sinusoidal?
Use i(t)=C dv/dt or do a frequency-domain analysis with harmonics.
How does frequency affect current?
Higher frequency lowers Xc and increases current linearly with f.
How does capacitance affect current?
Current is proportional to C; doubling C doubles current.
Can I use DC values?
For steady DC, current is zero after the transient; use i=C dv/dt during changes.
Is ESR important?
Yes, ESR adds resistive heating and limits allowable ripple current.
How to reduce capacitive current?
Lower the voltage or frequency, or reduce capacitance.
Related Posts
VA to Amps Calculator
Use our free VA to Amps calculator to convert volt-amps to current (A) for single and three-phase systems with formula and table.
power factor to voltage calculator
Convert power factor, power, and current to voltage using V= P/(I*PF) Useful for AC circuit analysis and electrical load calculations.
Watts To WH Calculator
Convert electrical power (watts) into energy usage (watt-hours) quickly and accurately. Use this calculator for DC, AC, and battery-powered devices with time input.
phase to ground voltage calculator
Calculate phase-to-ground voltage in single-phase and three-phase systems. Essential for power distribution, grounding checks, and electrical safety.
Watts To Kwh Calculator
Use our free Watts to kWh Calculator to convert watts to kilowatt-hours quickly. Ideal for energy consumption, billing, and electrical load calculations.
ma to voltage calculator
Convert milliamp current (mA) to voltage using Ohmโs Law. Enter current and resistance to find voltage instantly for electronics and circuit design.